Protective Equipotential Bonding of Gas Installations within Dwellings (PEB)
The following training and assessment packages are certificated by LCL Awards to industry led standards
Title | Content type |
---|---|
Sector |
|
Qualification Title |
Protective Equipotential Bonding of Gas Installations within Dwellings (PEB) |
LCL Qualification Code |
PEB1 |
Qualification Certificate Expiry |
5 years |
Guided Learning Hours |
4 - 6 hours |
Background |
PEB1 is for operatives involved in the repositioning, altering or extending the Protective Equipotential Bonding (PEB) conductor when changing the position of gas meters within a dwelling and associated outbuildings and locations. Formally known as the Main Equipotential Bond (MEB). |
Learners will |
Be trained and assessed on:
PEB is of a limited scope nature; where doubt or confusion arises on site regarding the electrical installation, advice should be sought from a competent electrical engineer prior to carrying out any work. |
Prerequisites |
Candidates must possess as a minimum valid CCN1, CMA1, CESP1 or CCLP1 (PD) or any of the City & Guilds N/SVQ6012 qualifications with MET1. A knowledge of basic electrical principles would be an advantage but not essential. |
Assessment method |
|
Related qualifications |
Frequently asked questions about this course
Is gas still a popular choice with candidates?
Yes, gas is still a popular choice. The majority of UK homes are still heated by gas, which means even after new gas boilers stop being installed in 2035, there will still be around 23 million homes using a gas boiler. These boilers will need servicing and maintenance for many years to come. Gas also provides the perfect stepping stone into heat pumps and other renewable technologies. LCL Awards' Level 3 heat pump courses are designed for qualified heating engineers (gas or oil).
What qualifications do you need for gas?
To become a gas installer you need to undertake specific qualifications, have relevant experience and join the Gas Safe register. You can achieve Level 3 gas qualifications through an apprenticeship scheme, which usually takes two to three years, combining a work placement with college, or you can complete a Managed Learning Programme (MLP), which covers everything you need to become a gas engineer without going through an apprenticeship. The MLP also includes a portfolio which demonstrates 'real-world' experience, mentored by an existing Gas Safe installer. At the end of a MLP, you would usually complete ACS certification in your chosen areas of gas. All gas installers must complete a core gas safety element (for example CCN1) and then specific modules such as catering, metering or gas fires, for example. Once you have successfully completed ACS assessments, you can join the Gas Safe register - this is a legal requirement for all gas installers. ACS certification must be renewed every 5 years.
What qualifications do I need to be a gas engineer in the UK?
To become a qualified gas engineer in the UK, follow these steps:
- Train - either as an apprentice, where you will complete a Level 3 gas qualification and combine time in college with work with an employer, or through a Managed Learning Programme (MLP). An MLP is an alternative route to becoming a qualified gas engineer usually completed through a private training centre.
- Gain hands-on experience - through your employer as an apprentice, or by completing an on-site portfolio, a key part of the MLP. Any work experience must be supervised by a Gas Safe registered installer.
- Undertake an ACS Training and Assessment: Achieve the relevant Core Gas Safety element (for example CCN1) and elements for specific appliances (e.g., boilers, cookers, fires).
- Register with Gas Safe: This is mandatory for all gas engineers.